Electrolux T5675 Service Manual page 140

140
15:17 DOOR LOCK 2
Only on Pocket washer running with one door setup.
This error code is activated if the input for DOOR LOCKED 2 is active at program start, i.e. the door
is locked although the control system has not requested locking.
Possible causes:
• DLCU 2 is in error mode after previous program run.
• Door lock solenoid broken.
Recommended actions:
1. Check door lock functionality in service program, by activating door lock and then by checking
inputs.
2. Check DLCU 2 status in service mode for more information on possible causes.
3. If DLCU 2 is in error mode, wait five minuts for automatic reset or manually reset the DLCU 2 in
service mode.
Troubleshooting