Rs-423 Model Mc2; J Rs-366A Adapters - Canoga Perkins 2240 User Manual

Canoga Perkins
4.6.2 V.35 / RS-423 Model MC2
This interface includes two physical connectors. The CCITT V.35 uses a 34-pin,
female Winchester connector and the RS-423 uses a 25-pin, female D-Type connector.
A typical application for this interface is to transport data and dialer information from
a video location to the network equipment over fiber optic cable. The V.35 interface
can carry the video Codec data with the control lead used for call set up. The RS-423
interface can carry either serial RS-232 data or parallel RS-366A data for the dialing
equipment when used with the appropriate RS-366A adapter (2240-366-ACE or 2240-
366-DTE) or equivalent cabling.
Table 4-J delineates the adapter wiring necessary to utilize the RS-423 for both the
DTE (Data Terminal Equipment) and ACE (Automatic Calling Equipment) ends.
Table 4-J.
RS-366A
Adapters
66