Clarion M4SSA Owner's Manual page 30

TV Operations
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [PIA] button.
2. When the desired station is found, press the
[PIA] button again to remain tuned to that
station.
Note:
• Do
not press and hold the [PIA] button for 2
seconds or longer. Doing
so
will trigger the auto
store function and start storing stations into
memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment
selection display.
2. Press the
[~]
or
[~~]
button to select "TV
AREA".
3. Press the
[~II]
button.
4. Turn the [ROTARY] knob to select the
reception area.
5. Press the
[~II]
button.
6. Press the [T] button to return to the previous
mode.
The above operations are required when a TV
tuner other than TTX7501 z is connected.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment
selection display.
2. Press the
[~
....] or
[~~]
button to select "TV
DIVER".
3. Turn the [ROTARY] knob clockwise to set to
"ON" or counterclockwise to set to "OFF".
eON:
Sets reception emphasizing the visual.
eOFF:
Sets the diver setting to OFF.
4. Press the [T] button to return to the previous
mode.
30
M455A