Clarion M4SSA Owner's Manual page 16

Basic Operations
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-
Enhancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY]
knob clockwise adjusts in the
+
direction; turning it counterclockwise adjusts
in the - direction.
• When "B-BST
0"
is selected, you can adjust
the bass in the range of -3 to 3.
• When
"IMPACT
0"
is selected, you can ad-
just the bass and treble in the range of -3 to
3.
• When
"EXCITE
0" is selected, you can adjust
the bass and treble in the range of -3 to 3.
.When "CUSTOM" mode is selected, bass
gain, frequency and Q-curve, and treble gain
and frequency can be adjusted.
*
Press and hold the [Z+] button for 1 second or
longer, then the setting parameter of bassi
treble will be initialized with a display
"Z+FLAT".
- B-BOOST
-IMPACT
- EXCITE
- CUSTOM
- Z+ OFF
bass emphasized
bass and treble
emphasized
bass and treble
emphasized mid de-
emphasized
user custom
no sound effect
Note:
• If the rear line level output is set to the full range
"REAR" setting, "S-VOL" will not be shown as a
selection.
Adjusting the bass
(Gain, Frequency, Q-curve)
This adjustment can be performed when the
Z-Enhancer Plus is set to
"CUSTOM".
1. Press the
[A-M]
button and select
"BASS".
2. Turning the
[ROTARY]
knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
*
The factory default setting is
"B<G 0>".
(Adjustment range: -6 to +6)
3. Press the
[~
....] or
[~~]
button to select
"B<F 60>".
Turn the
[ROTARY]
knob to select the
frequency.
*
The factory default setting is
"B<F 60>".
(Adjustment 60/100/200 Hz)
4. Press the
[~
....] or
[~~]
button to select
"B<Q 1>".
Turn the
[ROTARY]
knob to select the Q-
curve.
*
The factory default setting is "B<O 1>".
(Adjustment 1/1 .25/1 .5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the tone
Press the
[A-M]
button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
• When "B-BOOST" is set
"S-VOL 0" .. "B-BOOST" .. "BAL 0" ..
"FAD 0" .. Last function mode.
• When "IMPACT" is set
"S-VOL 0" .. "IMPACT" .. "BAL 0" ..
"FAD 0" .. Last function mode.
.When "EXCITE" is set
"S-VOL 0" .. "EXCITE" .. "BAL 0" ..
"FAD 0" .. Last function mode.
• When "CUSTOM" is set
"S-VOL 0" .. "BASS" .. "TREBLE" ..
"BAL 0" .. "FAD 0" .. Last function mode.
.When
"Z+
OFF" is set
"S-VOL 0" .. "BAL 0" .. "FAD 0" .. Last
function mode.
16
M455A
Adjusting the treble
(Gain, Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select ''TREBLE''.
2. Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
*
The factory default setting is "T<G 0>".
(Adjustment range: -6 to +6)
3. Press the
[~
....] or
[~~]
button to select
"T<F
10>".
Turn the [ROTARY] knob to select the
frequency.
*
The factory default setting is "T<F 10>".
(Adjustment 10 kHz/15 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.