Lever For Adjustment Of Cutting Height; Seat; Fuelling - Husqvarna 16 Operator's Manual

Lever for adjustment of cutting height

With this lever the cutting height can be adjusted to
9 different positions (4-90 mm, 45-80 mm Bioclip).
Unit with side/rear ejection/Combi, 40-90 mm.
BioClip unit, 45-95 mm.

Seat

The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Release the knobs under the seat and adjust it
forwards or backwards to the required position.
Lock the setting with the knobs.

Fuelling

The engine should be run on 85 octane (or higher)
unleaded petrol/gasoline (no added oil).
Environmentally adapted alkylate fuel is also
recommended.
WARNING!
Petrol/gasoline is highly
inflammable. Observe care and
fill up with fuel outdoors (see
safety instructions).
14
– English
PRESENTATION
6004-013H
6004-014H
6004-015