Checking The Blades - Husqvarna 16 Operator's Manual

Checking the blades

To achieve the best mowing results it is important
that the blades are undamaged and well-sharpened.
Check that the blades' attachment screws are tight.
IMPORTANT INFORMATION
Replacing or sharpening the blades
should be conducted by an authorised
service workshop.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.
IMPORTANT INFORMATION
BioClip units 90 and 103 should always
have the blades in the relative position
shown in the diagrams with an angle of 90°
between the blades. Otherwise the blades
can go against each other and damage the
unit.
BioClip 90
36
– English
MAINTENANCE
BioClip103
Combi 112
Cutting unit with rear ejection
6017-023
Cutting unit with side ejection
6016-108
8009-288
6008-226
6017-020