Cutting Height Adjustment Lever; Parking Brake; Seat; Fuelling - Husqvarna Rider ProFlex 21 II Operator's Manual

Cutting Height Adjustment Lever

Using the cutting height lever, the cutting
height can be adjusted between 7 different
positions.
In order to obtain an equal cutting height, it is
important that the air pressure is the same in
both front wheels (60 kPa).

Parking Brake

The parking brake is activated as follows:
1. Press the brake pedal.
2. Completely depress the lock button on
the steering servo housing.
3. Release the brake pedal while keeping
the button pressed in.
The parking brake lock is automatically
disengaged when the brake pedal is pressed
down.

Seat

The seat has a hinged mounting on the front
edge and can be folded forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under
the front edge of the seat is moved to the left,
after which the seat can be moved backwards
or forwards to the desired position.

Fuelling

The engine shall be run on a minimum of 87-
octane unleaded petrol (no oil mix). It can be
beneficial to use environmentally adapted
alkylate petrol. See also Technical Data
concerning methanol and ethanol fuels.
!
WARNING!
Petrol is highly flammable. Observe
caution and fill the tank outdoors
(see the safety instructions.)
PRESENTATION
8009-327
8009-328
8009-329
8009-330
17
English-