Unpack The New Imaging Unit - Tektronix Phaser 540 Plus User Manual

4
Caring for Your Printer
4-8
Phaser 540 Color Printer

Unpack the new imaging unit

1.
Remove the filter, the blower/brush cleaning tool, and the new
imaging unit from the packaging, but leave the protective cover on
the imaging unit until you insert it into the printer.
2.
Save all packing material in case moving or subsequent shipment
is necessary.
Caution
To ensure print quality, do not touch the underside or the right
side of the imaging unit; you may see fingerprints on your
output.
Never allow exposure to direct sunlight, which can cause
permanent damage in only a few seconds. Do not leave the
imaging unit exposed to any light for more than 45 seconds.
If you do, the unit may be damaged and need to be replaced.
When installing it, leave the protective cover on until
immediately before you insert it into the printer; then,
promptly close the front door.