Unpack The New Imaging Unit - Tektronix Phaser 550 User Manual

4
Caring for Your Printer
4-10
Phaser 550 Color Printer

Unpack the new imaging unit

Remove the contents from the packaging, but leave the protective
1.
plastic sheet on the imaging unit until you insert it into the printer.
Save all packing material in case moving or subsequent shipment
2.
is necessary.
Caution
To ensure print quality, do not touch the underside or the right
side of the imaging unit; you may see fingerprints on your
output.
Never allow exposure to direct sunlight, which can cause
permanent damage in only a few seconds. Do not leave the
imaging unit exposed to any light for more than 45 seconds.
If you do, the unit may be damaged and need to be replaced.
When installing it, leave the protective cover on until
immediately before you insert it into the printer; then,
promptly close the front door.