Playing Or Searching For Images; Preparing To Playback Or Search - Sony DKR-700 Instructions For Use Manual

Playing or Searching for Images

Preparating to Playback or Search
2
RM-C700, etc.
Video output
connector(s)
1
Video monitor, video
projector, etc.
1
Connect a video monitor, video projector, etc., to
the proper video output connector(s) on the rear
panel of the DKR-700/700P (see page 16(E)).
2
Connect necessary auxiliary devices (RM-C700,
etc.) to the proper remote connector(s) on the rear
panel (see page 16(E)).
3
Power the DKR-700/700P (see page 18(E)).
Warning
When using the DKR-700P, make sure that the
voltage setting meets the voltage in the mains line
prior to the operation.
26(E)
Remote connector(s)
3
3
5
4
Insert a disc containing the images into the disc
slot (see page 18(E)).
5
1) In the main menu, set the "Video" appropriately
for the output video signal to be used (see page
39(E)).
2) Set the necessary items in the System Setup
menu appropriately for the external devices to
be used (see page 45(E)).
Note
When operating the unit with an input signal from a
VCR, do not carry out variable-speed operations (fast
forward, rewind, jog/shuttle playback, etc.) on the
VCR, as this may cause the playback picture to break
up.
4
Illustration: DKR-700