Bar And Chain Combinations; Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Husqvarna T425 Operator's Manual

Bar and chain combinations

The following combinations are CE approved.
Length, inch Pitch, inch
10 1/4
10 3/8
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw Husqvarna T425 from 2007's serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
CISPR 12:1997, EN ISO 11681-2.
Notified body: TÜV Rheinland InterCert kft. Production Certification - H-1061, Budapest, Paulay Eden, 52 Hungary, has
carried out EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The
certificates for EC type examination in accordance with annex VI, have the numbers: U3 2892008 01
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 21, 2008
Bengt Frögelius, Development director chainsaw R
TECHNICAL DATA
Bar
Gauge, mm Max. nose radius
1,3 R10
1,3 7 T
Chain
Type Length, drive links (no.)
Husqvarna H00 60
Husqvarna H36 40
English – 37