Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 61 Operator's Manual

Guide bar and saw chain combinations

The following cutting attachments are approved for the model Husqvarna 61, 272 XP and 272 XPG.
Length, inch Pitch, inch
15
16
3/8
18
20
Saw chain filing and file gauges

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 61, 272 XP and 272 XPG from 2016's serial numbers and onwards (the year is
clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of
the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The following standards have been
applied: EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/10/2214 - 61, 0404/10/2215 - 272XP/XPG.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/063 - 61, 01/161/064 - 272XP/XPG.
For information relating to noise emissions, see the Technical data chapter.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
40 – English
TECHNICAL DATA
Guide bar
Gauge, mm Max. nose radius
1,5 11T
Saw chain
Length, drive links
Type
(no.)
56
64
Husqvarna H42
66
72