Table of Contents
Advertisement
12. CLEANING AND MAINTENANCE
CLEANING
Frequent cleaning is recommended to insure proper function and an extended fixture life.
• Clean each LED lens weekly to avoid weakness of light due to dust accumulation.
• Clean fan weekly to avoid dust accumulation.
• Use a moist, lint-free cloth. Never use alcohol or solvents.
MAINTENANCE
Regular inspections are recommended to insure proper function and an extended life.
There are no user serviceable parts inside this fixture, please refer all other service issues to
an authorized Elation service technician. Should you need any spare parts, please order
genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:
• A detailed electric check by an approved electrical engineer every three months, to make
sure the circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall
out during normal operation resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, color lenses, rigging hardware and rigging
points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to
enter into the fixture. Damaged rigging points or unsecured rigging could cause the
fixture to fall and seriously injure a person(s).
• Electric power supply cables must not show any damage, material fatigue or sediments.
Never remove the ground prong from the power cable.
w w w . e l a t i o n l i g h t i n g . c o m
45
RAYZOR
Q 7
U ser
M anual
2 .0
™
Advertisement
Table of Contents
