Elation Rayzor Q7 User Manual page 10

1. LED Assembly – RGBW Quad LEDs comprise the LED assembly.
2. DC Switch – Controls menu and display power when disconnected from main power.
3. Microphone – Captures external low frequency sounds to trigger the unit in Sound
Active mode. Designed to capture low frequency sounds only, tapping on the
microphone and/or high-pitched sounds may not trigger unit.
4. LCD Menu Control Display – Full color LCD animated menu display.
5. Mode/Esc Button – Used to access the menu functions and exit the current command.
6. Enter Button – Used to enter into or lock a certain menu function.
7. Left Button – Used to toggle through the menu display.
8. Down Button – Used to toggle down or back through the menu functions and settings.
9. Up Button – Used to toggle forward through the menu functions and settings.
10. Right Button – Used to toggle through the menu display.
11. 5-Pin DMX In – Accepts incoming DMX signal via a male 5-pin XLR jack.
12. 5-Pin DMX Out – Sends incoming DMX signal to the next fixture in the DMX chain via a
female 5-pin XLR jack.
13. Power Switch – Used to power the unit ON or OFF.
14. Fuse Holder Assembly – Houses 250v T3.13A GMA safety fuse. Always replace with
an exact match unless otherwise specified by an authorized Elation Service Technician.
Using a fuse other than that specified could seriously damage the unit and may void the
manufactures warranty.
15. Power In – Power connection (powerCon) to power source
16. Power Out – Power connection (powerCon) to daisy chain to another unit.
w w w . e l a t i o n l i g h t i n g . c o m
10
RAYZOR Q 7
U ser M anual 2 .0
™