Volvo S60 Owner's Manual page 340

09 Maintenance and specifications
Wiper blades and washer fluid
09
With the wipers in the service position,
fold out the wiper arm from the wind-
shield. Press the button on the wiper
blade attachment and pull the wiper
blade straight out, parallel with the wiper
arm.
Slide in the new wiper blade until it clicks
into place.
Check that the blade is securely in place.
338
4. Press the wipers back against the wind-
shield.
To return the wipers from the service position
to the normal position, fold the wipers back
against the windshield and press the START/
STOP ENGINE button briefly to put the igni-
tion in mode I (or start the engine).
Cleaning
Keeping the windshield and wiper blades
clean helps improve visibility and prolongs
the service life of the wiper blades. Clean the
wiper blades with a stiff-bristle brush and
lukewarm soap solution or car washing deter-
gent.
Filling washer fluid
Location of the washer fluid reservoir
The windshield and headlight washers share
a common reservoir.
The washer fluid reservoir is located on the
driver's side of the engine compartment. Dur-
ing cold weather, the reservoir should be
filled with windshield washer solvent contain-
ing antifreeze. For capacities, see page 367.