Volvo S60 Owner's Manual page 217

3. Use the thumb wheel to scroll among the
functions and select/confirm your choice
by pressing OK.
Function
Trip computer reset
– Average fuel consumption
– Average speed
Messages
Themes
Settings *
Contrast mode / Color mode
Service status
Information headings
Three trip computer headings can be dis-
played at the same time; one in each of the
displays (see the previous illustration). One of
the combinations of information headings in
the following table can be displayed. To do
so:
4. After completing your selection, exit by
pressing RESET twice.
Description
NOTE: This function does not reset the trip odometers, see page 217 for a description of how this is done.
For additional information, see page 195.
Set the way in which information is displayed in the instrument panel, see page 78.
Auto On Off
Select or .
Adjust the instrument panel's contrast and color.
Shows the number of months and mileage until the next scheduled service.
1. Ensure that none of the trip computer
controls are being used in a command
sequence; reset them by pressing RESET
twice.
2. Turn the thumb wheel to begin display-
ing the combinations of information head-
ings. Stop on the desired combination.
05 Comfort and driving pleasure
The following table lists the digital trip com-
puter's functions:
3. See the table for an explanation of the
heading or the actions that can be taken.
Scroll among the combinations of trip com-
puter information headings at any time by
turning the thumb wheel until the desired
combination is displayed.
*
Option/accessory, for more information, see Introduction.
Trip computer
05
}}
215