Volvo S60 Owner's Manual page 315

CAUTION
The vehicle must never be driven with
more than one temporary spare wheel.
Taking out the spare wheel
1. Release the bag's retaining straps.
2. Lift the bag out of the vehicle and remove
the spare wheel from the bag.
3. Fold up the floor hatch in the trunk.
4. Remove the jack* and tools* from the
foam block and change the wheels (see
the instructions in the following section
"Changing a wheel").
5. After changing wheels, return the jack
and tools to the foam block and close the
floor hatch.
6. If possible, place the wheel with the
punctured tire in the bag.
7. If there is a wheel in the bag, strap the
bag securely in place in the trunk.
WARNING
•
If there is a wheel in the bag, the bag
must be securely restrained using its
straps and the load anchoring eyelets in
the trunk. Carefully follow the instruc-
tions on page 312
•
If the wheel with the punctured tire is
too big to fit in the bag, it should be
securely restrained in the trunk using
suitable straps, a net for anchoring
cargo, etc.
Changing a wheel
1. Apply the parking brake and put the gear
selector in P.
2. Take out the jack*, lug wrench*, the tow-
ing eyelet and the wheel cover removal
tool* stowed under the floor of the trunk.
3. Remove the wheel cover (where applica-
ble) using the removal tool or remove the
wheel cover by hand.
4. Block the wheels that are on the ground
with wooden blocks or large stones.
08 Wheels and tires
Changing a wheel
Lug wrench and towing eyelet
5. Screw the towing eyelet into the lug
wrench as shown in the illustration.
CAUTION
The towing eyelet must be screwed into
the lug wrench as far as possible.
*
Option/accessory, for more information, see Introduction.
08
313