NComputing L130 User Manual page 29

NComputing L-Series User Manual rev.05.07.12
If static addressing configurations are used on the network, select "Static configuration" and supply the
appropriate IP, Subnet Mask, Gateway, and DNS server (primary and alternate) information. Click "OK"
to save changes and return to the main screen.
When your L300 device is connected to the network the "LNK" light (indicating Ethernet link) on the
L300 front panel should be on and you should see that the Ethernet activity light, "ACT," also blinks
when there is active Ethernet traffic to/from the device.
Installation with monitor mount
The L300 device comes with a mounting plate and two mounting screws, which can be secured to a
monitor via 75mm or 100mm VESA™-compliant mounting holes. The L300 device then attaches to the
mounting plate, resulting in a zero-footprint workstation. In general, we recommend using the top two
mounting holes on the monitor to give maximum cable access space.
Note: The L300 product also comes with a Kensington™ security lock interface, for additional theft
protection.
Page 29 of 95