L130/L230 Firmware Update - NComputing L130 User Manual

Installation with monitor mount
The L130 and L230 products include a monitor mount, mounting collar, monitor mount screws
(silver color) and mounting collar screws (black color) for mounting it to the back of a monitor.
These pictures show the L230 mounting process, and the final product, fully mounted and
ready for use.

L130/L230 Firmware Update

L130 and L230 access devices will automatically download firmware from vSpace when booting, if a
newer firmware version is on the host system than what is loaded in the device. This dynamic firmware
will only persist as long as the L130/L230 device is powered on. To make the latest firmware persist,
power on the device and select the "Update" tab and click on the "Update" button. When the access
device asks you for a password, enter "updateme" (without the quotes). Your access device will walk
you through the process of updating the firmware. For more details refer to the section "Using Your L-
series Access Device" later in this user manual.
Page 27 of 95
NComputing L-Series User Manual rev.05.07.12