NComputing L130 User Manual page 20

•
The window below shows the navigation screen that allows you to place the data file in the
desired location. Feel free to change the "File name" to something other than "activation" – but
don't change the "Save as type" field. The registration file must be of type "txt" – even though
the data inside is encrypted and must not be modified.
•
Before the registration wizard writes the data file, you will get a "Summary" screen showing all
user information that will be written to the data file. Also, any connected but unregistered L-
series access devices will be listed for registration.
•
If the information is correct, click the "Register" button or click "Back" if you wish to change any
of the information.
•
Next, email the created "txt" file to registration@ncomputing.com. Alternately, you can copy
the "txt" file to another PC, if necessary, to send the email.
It should normally take only one or two minutes to receive the vSpace Server license file by returned
email. If you do not see the file in your e-mail Inbox, be sure to check your email filter to ensure that the
message was not flagged as Junk or SPAM mail.
When you receive the license file, save it in a convenient disk location, and restart the "Registration
Wizard."
Select the "Complete offline registration by using activation file" or "Continue offline registration"
option and click "Next" and navigate to the disk directory where you have stored the returned
license/activation file.
Page 20 of 95
NComputing L-Series User Manual rev.05.07.12