Display; Figure 29 - Display Osd Screen; Figure 30 - Main Monitor Screen - Eneo DLR4-08 Operating Instructions Manual

Operating Instructions

Display

Highlight Display in the Devices menu and press the
information will be displayed on the monitor.
Figure 29 — Display OSD screen.
Free Space – The icon
when the DVR is not in the Recycle mode.
Date/Time – The current date and time information displays.
User Name – The name of the current user logged in displays.
Camera No. – The camera number displays at the top-left corner of each camera screen.
Camera Title – The camera title displays at the top-left corner of each camera screen.
Record – The record related icons display on each camera screen.
PTZ – The icon displays on each PTZ camera screen.
Text-In – The text input strings display on the screen. You can adjust the Display Dwell time (sec.) for the text input strings
displayed on the screen.
You can adjust the transparency of the setup screens by highlighting Transparency and using the Left and Right arrow
buttons.
Highlight the Main Monitor tab to switch to the Sequence screen.
Figure 30 — Main Monitor screen.
24
displays when the DVR is in the Recycle mode, and the percentage of available storage space displays
Highlighting OSD Margin... and pressing the
be displayed on the monitor. You can adjust the horizontal and vertical margins
so that text and icons will not be hidden beyond the edges of the monitor.
button. The Display screen allows you to select what
Highlighting an item and pressing the
item On and Off. When an item is On, there is a checkmark
in the box beside it. The following items can be turned On
or Off:
Remote Control – The icon
controlled by the infrared remote control.
Zoom – The icon displays on the enlarged video.
Network – The icon displays when the unit is connected to
a network via Ethernet.
Freeze & Sequence – The icon
mode, and the displays while in the Sequence mode.
Screen Group – The number of screen group displays when the
DVR is not in the 4x4 display mode of the 16-channel DVR, and
3x3 mode of the 8-channel DVR.
button displays how OSD text will
Highlight the box beside Mode and press the
can select between Full Sequence and Cameo Sequence.
Pressing the button causes the DVR to sequence
SEQUENCE
cameras, and the DVR can sequence cameras in two modes:
"Full" and "Cameo". In the Full mode, the DVR sequences
through the cameras and displays them full screen. In the
Cameo mode, the bottom right window in a multi-screen
format sequences through the cameras.
NOTE: Any cameras that are Off, have lost video or are set
to Covert (unless the user has authority to view
covert cameras) will be excluded from the Cameo
sequence.
button toggles that
displays when the DVR can be
displays while in the Freeze
button. You