Optional Wall Switch Installation - Napoleon BGD40-N Installation And Operating Instructions Manual

8.4

OPTIONAL WALL SWITCH INSTALLATION

DO NOT CONNECT EITHER THE WALL SWITCH, THERMOSTAT OR GAS VALVE DIRECTLY TO 110
For ease of accessibility, an optional remote wall switch or millivolt thermostat may be installed in a convenient
location. Route a 2 strand, solid core millivolt wire from the valve to the wall switch or millivolt thermostat. The
recommended maximum lead length depends on wire size:
WIRE SIZE
14 gauge
16 gauge
18 gauge
Disconnect the existing wires from terminals 1 and 3 (from the
ON/OFF switch) and replace with the leads from the wall switch / millivolt thermostat.
WARNING
!
VOLT ELECTRICITY.
MAX. LENGTH
100 feet
60 feet
40 feet
3
2
1
50.1
33
W415-0811 / A / 04.28.10