Press the MENU button to display the On-Screen Menu. Use
1
2
1(Component) and then press the SELECT button.
3
to select the desired system and then press the SELECT
button.
Video Jack or S-video Jack
Auto
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Y, Pb/Cb, Pr/Cr Jacks
Auto
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
Y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, 1080i, and 1080p.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
Video Input
Video System Selection
Input and then press the Point
Video, S-video or Computer
System and then press
AV System Menu (Video or S-video)
AV System Menu (Y, Pb/Cb, Pr/Cr)
Input 1
Input 2
Input 3
System
1080p
1080i
1035i
720p
575p
480p
575i
480i
RGB(PC analog)
RGB
Y, Pb/Cb, Pr/Cr
Auto
Y, Pb/Cb, Pr/Cr
45