Hitachi WJ200 Series Quick Reference Manual page 19

CALL NOW 800-985-6929
[Setting example]
After power ON, changing from 0.00 display to change the b083 (carrier frequency) data.
:Fix and stores the data and moves back to the function code
SET
:Cancels the change and moves back to the function code
ESC
Function code dxxx are for monitor and not possible to change.
Function codes Fxxx other than F004 are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.
CALL NOW 800-985-6929
http://www.automatedpt.com
Press [ESC] key to show
the function code
d001
SET
ESC
Press [ESC] key to move
on to the function group
F001
ESC
Press [ESC] key twice to move
on to the function group b001.
b001
Press Up key to change increase
function code (b001
Press SET key to display the data of
SET
Display is solid lighting.
b083
Press up key to increase the
data (5.0 12.0)
Press SET key to set
and save the data
When data is changed, the display
starts blinking, which means that new
data has not been activated yet.
http://www.automatedpt.com
Data of d001 will be shown on the
display after the first power ON
ESC
0.00
F001
b083)
b083
5 0
.
ESC
SET
12 0
.
17
Email: charles@automatedpt.com
Email: charles@automatedpt.com