Password Manager Program - Lucent Technologies DEFINITY Administrator's Manual

Password Programming

Password Manager Program

The Password Manager Program is the software that allows you to
enter, sort, print, save, and upload passwords to the Rack-Mount
Switch Modules.
!
Security Alert
Save password files to a floppy disk only, and store the disk
in a secure place.
NOTE:
Different from the Standalone Switch Module, the Multi-Mount
Rack does not allow any administration by the Remote Module
user. Consequently, Remote Module users cannot enable, change,
or disable their own passwords; passwords can only be changed by
the system administrator through the Password Manager Program.
Installing the Password
Manager Program
Follow these steps to install the Password Manager Program onto
an IBM-compatible computer with Windows™ Version 3.1 or
higher:
1. Place the supplied diskette into the computer (normally
Drive A).
2. From the Windows Program Manager, select RUN.
3. Type in A:\SETUP.EXE.
4. Press Enter.
:
Issue 3 July 1997
2-15