Table of Contents
Advertisement
Hardware Setup
2-2 Unpacking the Motherboard
When unpacking the Motherboard, check for the following items:
Ø The SY-5SSM SiS530 PCI/AGP Motherboard
Ø This Quick Start Guide *
Ø The Installation CD-ROM *
Ø One IDE Device Flat Cable
Ø One Floppy Disk Drive Flat Cable
Ø One serial port flat cable with a 9-pin connector
* If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the Motherboard from its anti-
static packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise, ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the Motherboard carefully, holding it by the edges.
You are now ready to start the installation.
7
SY-5SSM
Advertisement
Table of Contents
