Set Up Menu; Attaching The Front Panel - Pioneer DEH-X9600BT Operation Manual

Using this unit
a/b/c/d
Press to perform manual seek tuning, fast for-
h
ward, reverse and track search controls. Also
used for controlling functions.
VOLUME
i
Press to increase or decrease volume.

Set up menu

1 After installation of this unit, turn the
ignition switch to ON.
Set up appears.
2 Turn M.C. to switch to YES.
# If you do not use the unit for 30 seconds, the
set up menu will not be displayed.
# If you prefer not to set up at this time, turn
M.C. to switch to NO.
3 Press M.C. to select.
4 Follow these steps to set the menu.
To proceed to the next menu option, you need
to confirm your selection.
Language select (multi-language)
For your convenience, this unit offers a choice of sev-
eral languages. You can select the language you pre-
fer to use.
1 Turn M.C. to select the desired language.
English—Français—Italiano—Español—
Deutsch—Nederlands—РУССКИЙ
2 Press M.C. to confirm the selection.
Calendar (setting the date)
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock Setting (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to select time notation.
5 Turn M.C. to select the desired setting.
12H (12-hour clock)—24H (24-hour clock)
6 Press M.C. to confirm the selection.
FM step (FM tuning step)
Use FM step to set FM tuning step options (seek step
settings).
1 Turn M.C. to select the FM tuning step.
100kHz (100 kHz)—50kHz (50 kHz)
2 Press M.C. to confirm the selection.
! The manual tuning step is fixed at 50 kHz.
! When AF and TA are turned off, the seek step is
fixed at 50 kHz even if set to 100kHz.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or de-
creased.
2 Press M.C. to confirm the selection.
Quit appears.
5 To finish your settings, turn M.C. to se-
lect YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6 Press M.C. to select.
Notes
! You can set up the menu options from the sys-
tem menu and set up menu. For details about
the settings, refer to System menu on page 26
and Set up menu on page 27.
! You can cancel set up menu by pressing SRC/
OFF.

Attaching the front panel

Important
! Handle the front panel with care when remov-
ing or attaching it.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight and
high temperatures.
! To avoid damaging the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.
Section
02
5
En