Operating The Alarms; Operating The Snooze Feature - Timex T237 Manual

Dual alarm clock radio

Hide thumbs

Table Of Contents

Table of Contents

This clock radio features a dual alarm system, with two alarms that can be operated independently. The

alarms can be set to wake two people at different times, or to have a main alarm and a backup.

Setting Alarm-1 Time

1. Slide the

Alarm Set/Time Set Button to the ALM-1 setting. This will cause the display to show the

Alarm-1 wake time.

2. Set the Alarm-1 wake time using the

best method of setting the alarm time is advancing rapidly using the

few minutes past the desired alarm time, then using the

alarm time. To reverse the alarm time setting at a high speed, press and hold both buttons at the same

time. Remember to set the correct AM or PM alarm time, as shown by the PM Indicator.

3. Choose the Alarm-1 sound by setting the

setting. This activates the alarm, turning on the Alarm-1 Indicator Light on the display.

4. After setting the alarm, return the

5. If you selected the radio alarm, set the station and volume you wish to hear upon waking.

6. When the alarm sounds, turn off the alarm by pressing the

off the alarm without affecting its operation for the next day. To deactivate the alarm setting for future days,

set the

Alarm-1 Selector Switch to the Off position.

Setting Alarm-2 Time

1. The instructions for setting the second alarm are the same as the above instructions for setting the first

alarm. The only difference is that the

the Alarm-1 button and light.

1. Pressing the

Snooze Button after the alarm sounds will turn off the alarm for approximately seven minutes.

The snooze feature can be activated several times during the alarm cycle which is one hour.

Note: The Snooze button will not operate if the alarm goes off during a power failure.