Operating The Alarms; Setting The Alarm-1 Time For Cd Or Beeping Sound; Setting The Alarm-2 Time For Radio Or Nature Sound; Checking Your Alarm Time Settings - Timex T608 Manual

Stereo cd dual clock radio with nature sounds

Hide thumbs

Table Of Contents

Table of Contents

This clock radio features a dual alarm system, with two separate alarms that can be operated independently.

The alarms can be set to wake two people at different times, or to have a main alarm and a backup. Alarm-1

features a choice of a CD track or beeping alarm wake sound, while Alarm-2 features a choice of the radio or

a nature wake sound. You can set Alarm-1 only, Alarm-2 only, or both alarms.

Setting the Alarm-1 Time for CD or Beeping Sound

1. Slide the

Alarm-1 Set Switch to the "Set" position. The Alarm-1 time will begin flashing on the display.

2. Press the

Rewind/Minute Button or the

Press the buttons once to advance the time slowly, or hold the buttons to advance rapidly. Be sure to set

the correct AM or PM time, as shown by the PM Indicator in the lower-right-hand corner of the display.

3. After setting the time, slide the

to the "Off" position. The Alarm-1 time will disappear from the display.

Setting the Alarm-2 Time for Radio or Nature Sound

1. Slide the

Alarm-2 Set Switch to the "Set" position. The Alarm-2 time will begin flashing on the display.

2. Press the

Rewind/Minute Button or the

Press the buttons once to advance the time slowly, or hold the button to advance rapidly. Be sure to set

the correct AM or PM time, as shown by the PM Indicator in the lower-right-hand corner of the display.

3. After setting the time, slide the

or to the "Off" position. The Alarm-2 time will disappear from the display.

Note: Be sure that only one

are simultaneously in the "Set" position, the display will show the clock time.

Checking Your Alarm Time Settings

To check your alarm time settings, slide either of the

alarm time will begin flashing on the display.