Operating The Alarms; Setting The Alarm-1 Time For Cd Or Beeping Sound; Setting The Alarm-2 Time For Radio Or Nature Sound; Checking Your Alarm Time Settings - Timex T610 Manual

Stereo cd clock radio with nature sounds and mp3 line-in

Hide thumbs Also See for T610:

Table of Contents

All manuals and user guides at all-guides.com

This clock radio features a dual alarm system, with two separate alarms that can be operated independently.

The alarms can be set to wake two people at different times, or to have a main alarm and a backup. Alarm-1

features a choice of a CD track or beeping alarm wake sound, while Alarm-2 features a choice of the radio or

a nature wake sound. You can set Alarm-1 only, Alarm-2 only, or both alarms.

1. Slide the

Alarm-1 Set Switch to the "Set" position. The Alarm-1 time will begin flashing on the display.

2. Press the ³ Rewind/Minute Button or the · F. Forward/Hour Button to set the correct Alarm-1 time.

Press the buttons once to advance the time slowly, or hold the buttons to advance rapidly. Be sure to set

the correct AM or PM time, as shown by the PM Indicator in the lower-right-hand corner of the display.

3. After setting the time, slide the

to the "Off" position. The Alarm-1 time will disappear from the display.

1. Slide the

Alarm-2 Set Switch to the "Set" position. The Alarm-2 time will begin flashing on the display.

2. Press the ³ Rewind/Minute Button or the · F. Forward/Hour Button to set the correct Alarm-2 time.

Press the buttons once to advance the time slowly, or hold the button to advance rapidly. Be sure to set

the correct AM or PM time, as shown by the PM Indicator in the lower-right-hand corner of the display.

3. After setting the time, slide the

or to the "Off" position. The Alarm-2 time will disappear from the display.

Note: Be sure that only one

are simultaneously in the "Set" position, the display will show the clock time.

To check your alarm time settings, slide either of the

alarm time will begin flashing on the display.

Operating the Alarms

Alarm-1 Set Switch to the "CD/Buzz" position to turn on the alarm, or

Alarm-2 Set Switch to the "Radio/Sounds" position to turn on the alarm,

Alarm Set Switch is in the "Set" position at one time. If both switches

Alarm Set Switches to the "Set" position. The

Table of Contents

T610s