Table Of Alarm Codes Of The Main Electronic Board - Electrolux WASHING MACHINES Service Manual

13.5 Table of alarm codes of the main electronic board

Alarm Description
E11 Difficulties in water fill for washing
E13 Water leakage
E21
Difficulties in draining
E23 Drain pump triac faulty
E24 Fault in "sensing" circuit of drain pump triac PCB faulty.
Electronic pressure switch circuit faulty
E31 (frequency of pressure switch signal out of
limits)
Incorrect calibration of electronic pressure
switch (electronic pressure switch level
E32
different from 0-66 mm after initial calibration
drain and anti-boiling pressure switch on
"empty")
Incongruency between level of electronic
pressure switch and level of anti-boiling
E33
pressure switch 1-2 (duration of fault at least
60 seconds)
Incongruency between level of electronic
pressure switch and level of anti-boiling
E34
pressure switch 2 (duration of fault at least 60
seconds)
E35 Water overflow (flooding)
Fault in "sensing" circuit of anti-boiling
E36
pressure switch
E37
2nd level sensing circuit faulty
Pressure chamber blocked
E38
(water level does not vary for at least 30 sec.
during drum rotation
SOI/DT 2005-01 dmm
Possible fault
Tap closed or mains pressure insufficient; drain hose incorrectly
positioned; water fill solenoid faulty; leaks from the hydraulic circuit of
the pressure switch; pressure switch faulty; wiring faulty; PCB faulty.
Drain hose incorrectly positioned; mains pressure insufficient; water fill
solenoid faulty; leakage/blockage of pressure switch hydraulic circuit;
pressure switch faulty.
Drain hose kinked/blocked/incorrectly positioned; drain filter
blocked/dirty; drain pump faulty; wiring faulty; PCB faulty; current
leakage from heating element to ground.
Drain pump faulty; wiring faulty; PCB faulty.
Electronic pressure switch;
Wiring;
PCB faulty;
Tap closed or mains pressure insufficient;
solenoid valve;
hydraulic circuit of pressure switches;
Wiring; main PCB;
Pressure switch faulty;
Energy dispersion from the heating element to earth; Heating element;
Wiring faulty;
PCB faulty.
Hydraulic circuit;
Hydraulic circuit of pressure switches;
Electronic pressure switch;
Pressure switch;
Wiring; PCB;
Water fill solenoid faulty; leakage from pressure switch hydraulic circuit;
pressure switch faulty; wiring faulty; PCB faulty.
PCB faulty.
PCB faulty.
Pressure switch hydraulic circuit;
Pressure switches;
Motor drive belt broken;
58/67
Action/machine status
Cycle paused with door closed.
Cycle paused with door closed.
Cycle paused.
Safety drain cycle – Cycle stopped
with door open.
Safety drain cycle – Cycle stopped
with door released.
Cycle blocked with door closed.
Cycle PAUSED.
Safety drain - Cycle blocked with door
closed.
Cycle blocked with door closed.
Cycle blocked. Safety drain cycle.
Drain pump always in operation (5
minutes on, 5 minutes off etc.)
Cycle blocked, door locked.
Cycle blocked, door locked.
Heating phase skipped.
599 36 82-57
Reset
Start
Start
Start
OFF
OFF
OFF/reset
Start
OFF/reset
OFF/reset
OFF/reset
OFF/reset
OFF/reset
---