Electrical Connection - Technogym Bike Forma User Manual

1.3.5 Electrical connection

Before connecting the equipment to the mains power supply, ensure that the
electrical system specifications comply to binding regulations. Check the mains
power supply specifications on the label applied to the frame under the control
panel.
Danger
The power supply socket must be grounded
connection must be installed by a qualified electrician before
connecting the equipment to the electricity mains.
The wall socket must be located in a place where plugging and
unplugging can be done easily and safely.
When plugging in, the switch on the equipment must be in the "0"
position (i.e. the equipment must be switched off).
Plug the power cable first into the equipment socket and then into the wall
socket.
Warning
Check the state of the power supply cable periodically.
. If not, a ground
02258009
1.3 Installation
25