Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual page 9

35)
36)
37)
38)
MIC
A/V IN/OUT
PHONES/
REMOTE
47) 48) 49)
DIGITAL
STILL
DV
TO PC
PICTURE
50) 51) 52)
35) Reset Button [RESET] (l 74)
36) Speaker
37) Cassette Compartment Cover (l 14)
38) Cassette Cover Close Button [PUSH CLOSE] (l 14)
39) Cassette Holder
39)
40) Cassette Eject Lever [OPEN/EJECT] (l 14)
41) Lens Hood (l 69)
42) Lens (LEICA DICOMAR)
≥LEICA is a registered trademark of Leica microsystems IR GmbH and
40)
DICOMAR is a registered trademark of Leica Camera AG.
41)
43) Free Angle Flash (l 28)
42)
44) Microphone (Built-in, stereo) (l 22)
43)
45) White Balance Sensor (l 27, 70)
44)
Remote Control Sensor (l 11)
46) Tally Lamp (l 21)
45)
47) Microphone Jack [MIC] (l 22, 64)
46)
≥Connecting with an external microphone or audio equipment. (When
this Jack is in use, the built-in microphone does not operate.)
48) Audio-Video Input/Output Jack [A/V IN/OUT] (l 36)
S-VIDEO
IN/OUT
Headphone Jack [PHONES] (l 63)
Tethered Remote Control Jack [REMOTE] (l 10)
≥Connecting an AV Cable or Tethered Remote Control to this Jack
activates the Palmcorder's built-in speaker, but connecting a
headphone, etc. deactivates it.
≥When plugging the pin plug of the AV cable into the AV output terminal,
plug it in as far as it goes.
49) S-Video Input/Output Jack [S-VIDEO IN/OUT] (l 36)
50) USB Jack [TO PC] (l 50)
51) Digital Still Picture Terminal [DIGITAL STILL PICTURE]
52) DV Input/Output Terminal (i.LINK) [¥] (l 47)
≥Connect this to the digital video equipment.
≥"i.LINK" is the name of connectors in accordance with IEEE1394-1995.
"¥" is a logo marked on products conforming with the "i.LINK"
specifications.
53) Lens Cap String Holder (l 13)
54)
54) Flash Sensor (l 28)
53)
9