Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual page 64

ª Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because PhotoShot Index Signals are not recorded on still
pictures recorded in Continuous PhotoShot Mode, the
PhotoShot Index Search Function cannot be used for these
still pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
ª Playback Zoom Functions
≥You cannot adjust volume with the Remote Controller in
Playback Zoom Mode.
≥If you turn off the Palmcorder, or if you switch from VCR
Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal or Digital Still Picture
Terminal are not enlarged.
≥As you enlarge an image, the quality of image suffers.
≥During the Playback Zoom Function, the Variable Speed
Search Function cannot be used with the Remote
Controller.
ª Playback Digital Effect Functions
≥Revised signals of images to which digital effects are
added during playback cannot be output from the DV
Terminal or Digital Still Picture Terminal.
≥You cannot use the Wipe Function or Mix Function while
playing back the non-recorded portion of tape.
ª Multi-Picture Mode (VCR Mode)
≥The quality of Multi images deteriorates slightly.
≥Playback multi-mode screens cannot be output through DV
Terminal or Digital Still Picture Terminal.
≥If there is input from the DV Terminal, a multi screen
cannot be created.
≥When signals are input from S-Video Input/Output Jack or
Audio-Video Input/Output Jack, a multi screen cannot be
re-displayed.
≥Signals input from S-Video Input/Output Jack or
Audio-Video Input/Output Jack cannot be displayed on a
multi screen.
≥If you switch the Palmcorder from the Index Multi-Picture
Mode over to the Camera Mode, the setting of
[SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu is automatically
set to [STROBE].
ª Selecting the Sound during Playback
(l 31, 36)
You can select the sound by using the [AUDIO OUT] on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and subsound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO-REC] setting, playback sound becomes stereo
sound regardless of whether [AUDIO] is set to [MIX] or to
[AUDIO OUT].
64
(l 33)
(l 34)
(l 34)
(l 35)
ª Audio Dubbing
(l 36)
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be dubbed.
≥If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible
to use the Memory Stop function (l 70), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥In the case of importing data recorded with Audio Dubbing
to a Computer using the Computer's software program,
only the original sound (ST1) may be imported, depending
on the software program.
Microphone Jack
When audio dubbing is carried out through an external
microphone or audio equipment, connect it to the [MIC] Jack.
In this case, the built-in microphone of the Palmcorder will be
turned off.
ª Card Functions
(l 37 – 45)
≥Do not touch the connector terminal located on the back of
the card.
≥If the Card Slot Cover is open, the card cannot be
accessed.
≥Wide images cannot be recorded on the Memory Card.
≥A card that was formatted with this Palmcorder may not be
usable in other equipment. If this happens, please format
the card with the equipment with which the card is to be
used. Before proceeding with this operation, we suggest
that you take the precautionary measure of storing
important images in your personal computer.
≥In the Card PhotoShot mode, the Palmcorder automatically
saves the file numbers (100-0012, etc.) along with the
pictures. A file number is recorded with each picture as a
running number.
≥If the [TAPE/CARD/CARD MODE] Selector is set to
[CARD], the Palmcorder is automatically turned off when
you leave it for about 5 minutes without performing any
PhotoShot recording.
≥When the [TAPE/CARD/CARD MODE] Selector is set to
[CARD], you cannot record to the Tape.
≥It is recommended to use the Lens Hood for Card
Mode Recording attached as standard to record in
Card Mode. It will block the direct incoming light and
allows you to record more beautiful pictures.
≥When the Lens Hood for Card Mode Recording is used, the
lens cap cannot be fitted on it.
ª Card PhotoShot
(l 37)
≥Sound cannot be recorded.
≥The Shutter Effect cannot be used.
≥The Progressive Function is set to [ON].
≥The shutter speed ranges from 1/30-1/500.
≥Mega-pixel images cannot be recorded on a cassette as a
Mega-pixel picture.
≥A Card formatted with other equipment (like a Personal
Computer) might be unusable or it might take more time for
recording. We recommend that you use this equipment to
format it.
The following functions are not possible.
≥Digital Zoom
≥Cinema Mode
≥Digital Effects/Functions
≥Title functions (When in Mega-pixel mode only)