Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual page 65

ª Recording to a Card from other equipment
(l 38)
If you set the [TAPE/CARD/CARD MODE] Selector to
[CARD], you can use the Card PhotoShot Function for
externally input signals. (Not during recording.)
≥Black streaks may appear at the four edges of the image.
≥When the [PHOTO SHOT] Button is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
≥While recording with analog input, a Card PhotoShot
Function cannot be used.
ª Recording Moving Pictures (MPEG4)
≥The file format supported by this Palmcorder is ASF. (Not
all the ASF formatted files will be played back.)
≥[PHOTO SHOT] Button does not operate.
≥When the color of the screen changes or blurs, adjust the
shutter speed manually to 1/30, 1/60 or 1/100.
≥The Zoom Microphone Function is disabled.
≥More than 100 hours of remaining time is indicated as
[R:99h59m].
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not
be started.
≥The shutter speed is adjustable within the range of 1/30 to
1/500 while recording moving pictures (MPEG4).
≥The picture size of the moving picture (MPEG4) is set to be
[176k144].
≥When attaching to email, we recommend the file size to be
less than 1MB.
[FINE]: approximately 20 seconds
[NORMAL]: approximately 1 minute
≥The following functions are disabled.
≥1.5 Times Tele Jump Zoom function (l 22)
≥Zoom Microphone function (l 22)
≥Digital Zoom (l 23)
≥Cinema Function (l 24)
≥Digital Effect Functions (l 29)
≥Title In/Creation (l 43)
≥Fade In/Out Function (l 23)
ª Voice (Voice Recording Function)
≥[PHOTO SHOT] Button does not operate.
≥The sound is recorded in monaural, that is, mixed [L] and
[R] of the stereo sound.
≥The continuous recording time for voice depends on the
capacity of the memory card. (24 hours, max.)
≥More than 100 hours of remaining time is indicated as
[R:99h59m].
ª Card Playback
≥If a blank (nothing recorded) Card is played, the screen
becomes white and the [NO PICTURE],
[NO MPEG4 DATA] or [NO VOICE DATA] Indication
appears depending on the mode selected.
≥If you attempt to play back if file recorded in a different
format or if file data is defective, the [k] Indication and the
[CARD ERROR] Indication could appear as a warning.
≥In the case of displaying memory images on a Multi
Screen, if there are 7 or more images, they cannot be
displayed all at once. Rotate the [PUSH] Dial or push the
[5] Button to display the next 6 still pictures.
≥When the pictures recorded by another Palmcorder are
(l 39)
played back with this Palmcorder, the size of the pictures
may be different from the recorded size.
≥MPEG4 data or Voice data will not be output from DV
Terminal.
≥MPEG4 data cannot perform Cue/Review Playback, Slow
Motion Playback (forward direction and reverse direction),
Still Advance Playback (forward direction and reverse
direction) or Jog Playback.
≥During automatic copying of tape pictures onto a card, the
remaining number of pictures that can still be recorded on
the Card is displayed. When it becomes [0], the tape is set
to the Recording Pause Mode.
≥For the MPEG4 moving pictures recorded on a camera
other than this camera, "k" may be displayed when they
are played back. If the [1] Button is pressed in this case,
"!" will be displayed for a few seconds and the next image
will be displayed.
≥For the still images recorded on the camera other this
camera, the mega-pixel image size may be displayed.
≥If an MPEG4 motion picture is played continuously for a
long time, the playback may stop in the midway and the
video camera may freeze while a still picture is being
displayed. If this happens, press the [RESET] button.
≥When performing Cue or Review Playback of a voice data,
the Playback elapsed time may not correspond to the
actual recording time of the sound
≥When playing back an MPEG4 or voice data recorded by
other equipment, a part of the playback elapsed time may
be indicated as [--].
(l 39)
ª Voice Power Save
≥Voice Power Save Function automatically shuts off the
monitor to reduce the power consumption when no
operation is being performed in the Voice Recording Mode.
When [VOICE POWER SAVE] on the
[OTHER FUNCTIONS] Menu is set to [ON], the power
save function is activated, and the screen turns off in a few
seconds after operations, such as play or recording are
performed.
≥The Voice Power Saving Function is cancelled when any
operation is performed.
≥Do not forget to turn off the power.
ª Copying Pictures from a Memory Card to a
Cassette
≥When recording the Card Images on a Tape, a PhotoShot
index signal is automatically recorded with a picture.
≥Even if you edit the Slide Show, it is not applied to the order
in copying the pictures.
(l 40)
(l 40)
(l 41)
65