Creating A Title; Inserting A Title - Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual

2 2, 4, 5
6, 7
W.B./SHUTTER/IRIS/
MF/VOL/JOG
3
PHOTO PHO
SHO SHOT
TAPE CARD
CARD MODE
1
1) 2)
3) 4)
r
3, 4
6
W.B./SHUTTER/IRIS/
PHOTO
MF/VOL/JOG
SHOT
1 2, 4
TAPE CARD
CARD MODE
5
MULTI/
TITLE
P-IN-P
1
TITLE
USR00002.TTL
2

Creating a Title

You can create a title and record on a Memory Card.
1
Camera Mode:
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [PICTURE] Indication appears.
Set the Lens to the image you want to use for creating a title.
PUSH
VCR Mode:
Search for the image you want to use for creating a title and
set the Palmcorder to the Still Playback Mode.
2
Set [CARD SETUP] >> [CREATE TITLE] >> [YES].
3
Press the [PHOTO SHOT] Button.
≥The title is stored.
≥To perform PhotoShot again, select [RETURN].
4
Rotate the [PUSH] Dial to select [LUMINANCE] and press it.
5
Rotate the [PUSH] Dial to adjust the title contrast and then
press it.
≥The [COLOR] Indication appears.
6
Rotate the [PUSH] Dial to select desired color and press it.
7
Select [RECORD] and then press the [PUSH] Dial.
Selecting Colors
If you make color selection by rotating the [PUSH] Dial when creating a title,
you can change the color as follows.
1) Original Color (The color of the captured image)
≥Title in the original color in which the dark portion (blackish portion) of
the captured image is missing.
2) Preset colors (black, blue, green, cyan, red, magenta, yellow, and white)
≥Title in a preset color in which the dark portion (blackish portion) of the
captured image is missing.
1)
3) Original color (the color of the captured image)
≥Title in the original color in which the bright portion (whitish portion) of
the captured image is missing
4) Preset colors (black, blue, green, cyan, red, magenta, yellow, and white)
≥Title in a preset color in which the bright portion (whitish portion) of the
captured image is missing.
~~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Title

You can select one of your original titles and display it. (It can be displayed in
Camera Mode, VCR Mode, and Card Playback Mode.)
1
Press the [TITLE] Button.
≥The title that was created last is displayed.
2
Press [MULTI] Button.
≥A list of titles is displayed.
3
Rotate the [PUSH] Dial to select a desired title.
≥The selected title is marked with a red frame.
4
Press the [PUSH] Dial or press the [MULTI] Button.
PUSH
≥The selected title is displayed.
5
Using the [TAPE/CARD/CARD MODE] Selector, select the
recording target.
Camera Mode: TAPE or CARD
VCR Mode: CARD
Card Playback Mode: TAPE
6
Press the [PHOTO SHOT] Button.
≥A still picture is recorded under the inserted title.
≥If you record on a Cassette in Normal Recording Mode, set the
[TAPE/CARD/CARD MODE] Selector to [TAPE] and press the
Recording Start/Stop Button.
2
File Name
Clearing a Title Display
Press the [TITLE] Button.
≥The [ACCESS] Indication appears until the titles are displayed completely.
Perform the Recording after the Indication disappears.
≥For other notes, see page 66.
1
43