Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual page 39

TAPE CARD
CARD MODE
1, 2
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
M
R:0h20m
MPEG4
R:0h20m
VOICE
ª Recording Moving Pictures (MPEG4)
You can record moving pictures on a Memory Card for e-mailing. The
recorded data can be also played back on a computer with Windows Media
Player.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [MPEG4] Indication appears.
3
Press the Recording Start/Stop Button.
≥It takes 2 to 3 seconds to start recording.
≥During recording, the [
≥The maximum continuous recording times are:
[FINE] (high image quality): 2 minutes
[NORMAL] (normal image quality): 120 minutes
The Palmcorder will automatically stop recording when the approximate
time listed above has elapsed (the card capacity has been fully utilized).
Recording from a Cassette (VCR Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [MPEG4] Indication appears.
3
Start playback and press the Recording Start/Stop Button at
the desired scene.
Recording from other equipment (VCR Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
3 [CARD MODE] until the [MPEG4] Indication appears.
3
Input the image from other equipment then press the
Recording Start/Stop Button at the desired scene.
Selecting the quality of MPEG4 Recording images
1 1 1 1
Set [CAMERA FUNCTIONS] or [VCR FUNCTIONS] >>
[CARD SETUP] >> [MPEG4 MODE] >> a desired image
quality.
Maximum recording time on the supplied Card (16 MB)
[FINE]: approximately 5 minutes
[NORMAL]: approximately 15 minutes
≥The video resolution of the camera is reduced when making an MPEG4
recording. This is done in order to optimize the image quality in MPEG4
recordings, and does not reflect that there is a problem with the software or
hardware.
≥For other notes, see page 65.
ª Recording Voice (Voice Recording Function)
You can record voice data on a memory card.
1
Slide the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [VOICE] Indication appears.
3
Press the Recording Start/Stop Button.
≥Voice from built-in microphone is recorded.
≥It takes 2 to 3 seconds to start recording.
≥The recorded file is automatically locked (to prevent accidental
erasure).
≥Voice from external microphone connected to the microphone jack can
also be recorded.
≥During recording, the [
≥When Remaining Time Indication becomes [R:0h00m],
[NO SPACE LEFT] Indication appears. Recording may not be started.
Maximum recording time on the supplied Card (16MB)
Approximately 58 minutes
≥For other notes, see page 65.
] Indication is lit in red.
MPEG4
MPEG4
] Indication is lit in red.
VOICE
39