Special Features; Using A Memory Card; Recording On The Memory Card - Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual

Digital video camcorder
Hide thumbs Also See for Palmcorder MultiCam PV-DC352:
Table of Contents

Advertisement

1
A
3
1
3
W.B./SHUTTER/IRIS/
MF/VOL/JOG
4
PHOTO
SHOT
TAPE
CARD
CARD MODE
1, 2
1
F 7
640
PICTURE
4
2
MPEG4
3
VOICE

Using a Memory Card

A Card can be used to record files or play back files.
≥Use a genuine SD Memory Card or MultiMediaCard only.
ª Inserting a Memory Card
Before inserting a Memory Card, be sure to turn off the Palmcorder.
1
Open the Card Slot Cover.
2
While holding the Memory Card with its cut corner
right, insert it into the Card Slot.
3
Close the Card Slot Cover securely.
ª Removing the Memory Card
Open the Card Slot Cover, press the centre of the Card and then pull it
straight out.
≥After removing the Card, close the Card Slot Cover.
≥The Palmcorder or the Card may be damaged if the Card is forced out when
the Card is fully inserted.
ª [ACCESS] Lamp
While the Palmcorder is accessing the Card (reading, recording, playback,
erasing, moving of images), the [ACCESS] Lamp
≥While the [ACCESS] Lamp is on, never attempt to: pull out the Card, to turn
off the Palmcorder power, or switch the [TAPE/CARD/CARD MODE]
Selector. Such actions will damage the Card and cause the Palmcorder to
malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~~

Recording on the Memory Card

3 kinds of data can be recorded by selecting with the [TAPE/CARD/
CARD MODE] Selector. When recording still picture, slide the [TAPE/CARD/
CARD MODE] Selector until the [PICTURE] Indication
PhotoShot), when recording a moving picture, slide the [TAPE/CARD/
CARD MODE] Selector until the [MPEG4] Indication
Recording), when recording voice, slide the [TAPE/CARD/CARD MODE]
Selector until the [VOICE] Indication
≥For other notes, see page 64.
PUSH
ª Card PhotoShot
Still pictures can be recorded on the Memory Card from the Palmcorder lens
as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Palmcorder is approximately
1,230,000 pixels. Recording of images with a size that is larger than a million
pixels is called mega-pixel still-picture recording. Compared to images of
normal recording, images that are created by mega-pixel still-picture
recording can be printed out more clearly.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [PICTURE] Indication appears.
≥Remaining Number of Card PhotoShot pictures
3
Set [CAMERA FUNCTIONS] >> [CARD SETUP] >>
[PICTURE SIZE] >> [1280k k k k 960] or [640k k k k 480].
4
Press the [PHOTO SHOT] Button.
≥The [
PICTURE
≥Mega-pixel recording (when you select [1280k960] in step 3) is useful for
taking clear pictures, but the following functions are disabled during
mega-pixel recording.
≥Title In/Creation (l 43)
≥The power automatically turns off about 5 minutes after a card has been
inserted.
≥With the Progressive PhotoShot Function, you can record still pictures with
higher resolution than with the normal PhotoShot Function (l 22).
≥For other notes, see page 64.

Special Features

3
appears (Voice Recording).
] Indication will light in red.
A
facing
1
lights up.
1
appears (Card
2
appears (MPEG4
4
.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Palmcorder multicam pv-dc352-k

Table of Contents