Hunter 41787-01 Installation Manual page 10

B11
B10
D
Move the housing into position above the ceiling. Pull the wires through the strain relief and tighten the
strain relief screws.
B12 B13
D
Attach existing ducting to duct connector. Tape joints. Fit housing into the opening and secure by tightening the
If ducting does not fit securely,
pre-loaded screws into the joist.
an adapter may need to be purchased.
Note: Install the box flush with the sheetrock (ceiling).
B14
D
Connect the wiring.
41787-01 1/11/2006
10