Mpeg Nr; Dnr; Ambient Light Sensor - Toshiba 58L9300UC User Manual

112
Picture and Sound Controls
Using the advanced picture settings features

MPEG NR

The MPEG noise reduction feature allows you to reduce visible
interference caused by MPEG compression.
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Noise Reduction
and press the OK button.
3 Press the p / q (arrow) buttons to select MPEG NR and press the
OK button.
4 Press the p / q (arrow) buttons to select Low,
Off.
5 Press the EXIT button.
NOTE
If the picture mode is set to Game or PC, this feature is not available.

DNR

DNR is a Dynamic Noise Reduction technology that filters out video
noise without decreasing picture sharpness for clean, crystal-clear images.
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Noise Reduction
and press the OK button.
3 Press the p / q (arrow) buttons to select DNR and press the OK
button.
4 Press the p / q (arrow) buttons to select Low, Middle, High, Auto,
or Off.
5 Press the EXIT button.
NOTE
The differences may not always be noticeable. For the best results, use
lower settings, as picture quality may be greatly reduced if the setting is too
high.
If the picture mode is set to Game or PC, this feature is not available.

Ambient Light Sensor

When the ambient light function of Auto Brightness Sensor is set to On,
the TV optimizes the backlighting levels to suit ambient light conditions.
1 Press the SETUP button.
2 Select Picture > Advanced Picture Settings > Auto Brightness
Sensor Settings and press the OK button.
Get other manuals https://www.bkmanuals.com
Middle, High, or