Using the net partition behind the rear seats
Fig. 53 Pull out the net partition/roll up
ä
First read and observe the introductory information and safety warn-
ings
on page 58.
Pulling out
›
Open the rear right door.
›
Fold down the rear seat backrests slightly forwards, which makes it possible to
clear the access for removing the net partition.
›
Pull the net partition by the bracket
tion of the holders
.
C
›
Insert the cross rod into one of the mounts
›
In the same way, insert the cross rod into the mount
vehicle.
›
Then push the seat backrest back into the upright position until the securing
knob clicks into place - check by pulling on the seat backrest.
Folding
›
First pull the cross rod back slightly on the one side and then on the other side
and remove it from the mounts
C
›
Hold the cross rod in such a way that the net partition can slowly roll up into
the housing
without being damaged.
B
If you wish to use the entire boot, the foldable boot cover can be re-
moved
» page
56.
» Fig. 53
out of the housing
A
B
and push forwards.
C
on the other side of the
C
» Fig.
53.
Using the net partition behind the front seats
Fig. 54 Pull out the net partition/roll up
ä
First read and observe the introductory information and safety warn-
ings
on page 58.
Pulling out
›
Open the rear right door.
›
Fold the seat cushions and rear seat rests forward.
›
Pull the net partition by the bracket
in direc-
tion of the holders
›
Insert the cross rod into one of the mounts
›
In the same way, insert the cross rod into the mount
vehicle.
Folding
›
First pull the cross rod back slightly on the one side and then on the other side
and remove it from the mounts
›
Hold the cross rod in such a way that the net partition can slowly roll up into
the housing
without being damaged.
B
›
Fold the rear seats back into their original position.
Ð
» Fig. 54
out of the housing
A
.
C
and push forwards.
C
C
» Fig.
54.
C
Seats and Stowage
in direc-
B
on the other side of the
Ð
59