Skoda Fabia Owner's Manual page 100

›
If the hands-free system announces (as standard SKODA_BT) on the display of
the mobile phone, enter the PIN
1)
tion is established .
2)
›
After terminating the connection, confirm the creation of a new user profile in
the information display.
If there is no free space available to create a new user profile, delete an existing
user profile.
During the connecting procedure, no other mobile phone may be connected with
the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby on-
ly one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes af-
ter the ignition is switched on and is also deactivated when the mobile phone has
connected to the hands-free system.
Restoring the visibility of the hands-free system
If you have not managed to connect your mobile phone with the hands-free sys-
tem within 3 minutes of switching on the ignition, the visibility of the hands-free
system can be reestablished for 3 minutes in the following ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
Via the information display in the menu item Bluetooth - Visibility.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone . Check on your mobile phone if the automatic
2)
connection has been established.
Disconnecting the connection
›
By withdrawing the ignition key.
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting the user in the information display in the menu Bluetooth -
User.
®
1) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN is
either displayed or the PIN 1234 has to be entered manually.
2) Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
tion is completed by inputting a code. If the authorisation input is required, it must always be per-
formed when re-establishing the Bluetooth connection.
98
Using the system
within 30 seconds and wait, until the connec-
Solving connection problems
If the system announces No paired phone found, check the operating state of the
mobile phone.
›
Is the mobile phone switched on?
›
Is the PIN code entered?
›
®
Is Bluetooth active?
›
Is the visibility of the mobile phone active?
›
Has the mobile phone already been paired with the hands-free system?
Note
If a suitable adapter is available for your mobile phone, only use your mobile
■
phone in the adapter inserted in the telephone mount so that the radiation in the
vehicle drops to a minimum.
Placing the mobile phone in the adapter inserted in the telephone mount en-
■
sures optimum sending and receiving power.
Symbols in the information display
Symbol
Charge status of the phone battery

Signal strength

a phone is connected to the hands-free system.

The hands-free system is visible to other devices.

A multimedia unit is connected to the hands-free system.

a) This function is only supported by some mobile phones.
®
connec-
Importance
a)
a)
Ð
Ð