Hunter WELLESLEY 82007 Installation Manual page 10

B22
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
B24
I
Secure the motor by tightening the 2 screws.
B26
O N
Test the motor. If the motor does not run,
check the plug connection.
10
H
O F F
B23
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
B25
Turn on the power source.
B27
Go to step
E1
on page 17
to attach grille.
H
41943-01 1/13/2006