Porsche 911 GT3 Owner's Manual page 206

A - Filler bottle
B - Filler hose
C - Plug of the filler hose
D - Valve turner
E - Valve insert
F - Tire valve
Inserting sealant
1.Leave the object that caused the puncture in
the tire.
2.Remove sealant and the enclosed sticker from
the luggage compartment.
3.Adhere the sticker in the driver's field of vision.
4.Shake filler bottle A.
5.Screw filler hose B onto the filler bottle.
The filler bottle is now open.
6.Unscrew valve cap from tire valve F.
7.Remove valve insert E from the tire valve with
valve turner D.
Keep the valve insert in a clean and dry place.
8.Remove plug C of the filler hose B.
9.Push filler hose onto the tire valve.
10.Hold filler bottle higher than the level of the tire
valve and press it together forcefully until the
bottle is completely emptied into the tire.
11.Pull filler hose off the tire valve.
12.Twist the valve insert firmly into the tire valve
using the valve turner.
13.Connect the compressor to the cigarette
lighter and inflate the tire to the prescribed tire
pressure.
Please see the chapter "TIRE PRESSURES FOR
COLD TIRES 68 °F/20 °C" on Page 237.
14.Screw valve cap onto the tire valve.
15.Check the tire pressure after driving for around
10 minutes.
If the tire pressure is less than 22 psi (1.5 bar),
do not continue driving.
If a value of more than 22 psi (1.5 bar) is
indicated, correct the pressure to the
prescribed value.
16.Please consult your authorized Porsche
dealer.
Care Instructions
After drying, any sealant that emerges can be
peeled off like a film.
Warning!
Risk of accident, resulting in serious
personal injury or death.
f Have the tire replaced by an authorized
Porsche dealer immediately.
f Avoid hard acceleration and high cornering
speeds.
f Do not exceed maximum speed of 50 mph
(80 km/h).
f Please always see the safety and operating
instructions, which can be found in the
separate operating instructions for the sealant
and on the compressor.
Practical Tips, Emergency Service
205