Setting The Hom!'" Audio Mode; Viewing The Digital Signal Meter - Toshiba Regza42RV535U Owner's Manual

Setting the HDMI™ audio mode
Viewing the digital signal meter
To set the
HDMI
audio mode:
Audio Setup
From the Audio menu, highlight Audio Setup and
press@.
Press. or
T
to select HDMI1 Audio and then press
~ or ~ to select the HDMI 1 audio mode (Auto,
Digital, or Analog). (Auto is the recommended
mode.) See "Connecting an HDMI or DVI device to
the HDMI input"
(I&'
page 16).
To close the screen and return to the Terrestrial
menu:
Highlight Done and press
8.
To return to normal viewing:
Press
E~r
You can view the digital signal meter in the ANT /
CABLE digital TV input source only.
To view the digital signal meter:
1
From the Setup menu, highlight Installation and
press
8.
A new set of Installation menu icons will
appear.
2
Open the Terrestrial menu, highlight Signal Meter,
and press
8.
3 Press • T~ ~ to select the digital channel whose
signal you want to check.
Note:
• The physical digital channel number listed in the Signal
Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
• The signal strength does not change between virtual
channels on the same physical channel.
No
Stereo
English
Dolby
D!~~tal
When viewing the HOMI 1 input,
digital audio from the HOMI input
will be output.
When viewing the HDMI 1 input, if
digital audio from the HDMI input
is available, it will be output. If not,
the TV will automatically detect and
output analog audio from the PC
Audio input.
Language
Optical Output Format
Dolby Digital
Dynamic Range Control
Digital
Auto
2
1
Analog
When viewing the HOMI 1 input,
analog audio from the PC Audio
input will be output.
3
To save your settings, highlight Done and press @.
Note: Because the PC and HOMI 1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDM/1 Audio menu setting. If PC Audio is set to "No, "the
HDM/1 Audio setting changes to "Auto. " If PC Audio is set to
"Yes, " the HDM/ 1 Audio setting is set to "Digital" and is
grayed out in the menu. (Also see item 4 on page 11 and
"Setting the PC Audio" on page 51.)
33
I