Table of Contents
Advertisement
6 • Assembling the Blades
Step 6-1 (Detail)
Grommet
Use with grommet
10
Use without grommet
Blade Mounting
Hunter Fan Company
Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets,
6-2. Attach each blade to a blade iron using three blade assembly
6-3. Remove the blade mounting screws and rubber shipping bumpers
6-4. For each blade, insert one blade mounting screw through the
Blade Assembly
Screws
Screw
insert them by hand into the holes on the blades.
screws. If you used grommets, the blades may appear slightly loose
after screws are tightened. is is normal.
from the motor.
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Step 6-4
Steps 6-1 – 6-2
42013-01 • 02/02/05
Advertisement
Table of Contents
