Settings Menu - Epson EB-Z8455WU User Manual

Settings Menu

Sub Menu
Geometric Correction
Split Screen
Control Panel Lock
Lens Operation Lock
Pointer Shape
Power Consumption *
You can correct distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. s
Use the [w/ ], [v/ ], [</ ], and [>/ ] buttons on the control panel to perform similar corrections to V-Keystone and H-
Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. s
Arc Correction: Fine adjustment of the curved distortion caused by slack or shrinkage of the screen. s
Point Correction: The projected image is divided by the grid, and you can correct the distortion by moving the point of intersection from
side to side and up and down. s
You can split the screen into two screens. s
You can use this to restrict operation of the projector's control panel. s
You can use this to restrict the lens operation of the remote control. s
You can select the shape of the pointer. s
Pointer 1: Pointer 2: Pointer 3:
You can set the lamp brightness to Normal 1, ECO, or Normal 2.
Normal 1: Projects at normal brightness.
You can change the lamp brightness in Multi-Projection - Brightness Level from the Extended menu. s
ECO: Select this if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When
ECO is selected, the amount of electricity consumed and the fan rotation noise during projection are reduced, and the lamp's operating life
is extended.
Normal 2: Adjusts the brightness automatically according to the surrounding environment.
Function
p.153
p.29
p.34
p.140
p.143
p.40
p.41
p.57
55
p.142