Epson EB-Z8455WU User Manual page 156

Settings for Multiple Projectors
D
Displays the guide.
(1) Select the Guide Display, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
If the guide is not clear, you can change the color of the guide on
q
Guide Colors.
E
Set "Top Edge/Bottom Edge/Right Edge/Left Edge".
(1) Select Top Edge/Bottom Edge/Right Edge/Left Edge to set the edge
blending, and then press the [Enter] button.
(2) Select Blending, and then press the [Enter] button.
(3) Select On, and then press the [Enter] button.
(4) Press the [Esc] button.
(5) In Blend Range, adjust the range to be shaded.
The value for when the overlapped range and the guide are in the same
position is the best.
If you press the [Default] button while adjusting Blend
q
Range, the value that you are adjusting is reset to the de-
fault.
(6) Press the [Esc] button.
F
Set "Blend Curve".
(1) Select Blend Curve, and then press the [Enter] button.
(2) Select the way of shading from 1 to 3, and then press the [Enter] button.
(3) Press the [Esc] button.
G
Adjust the black level.
(1) Select Black Level, and then press the [Enter] button.
(2) In Brightness Correct., adjust the level to correct.
(3) In Color Correct. (G/R), adjust the level to correct.
(4) In Color Correct. (B/Y), adjust the level to correct.
156