Config) Mask (Alarm Mask) - Comtech EF Data CRS-100 Operation Manual

CRS-100 1:1 Redundancy Switch
Operation
6.1.3

(CONFIG) MASK (Alarm mask)

ALARM MASK:
RX-AIS
The user is prompted to select AGC, Eb/No, RX-AIS, BUF-SLIP, or TX-AIS, using the
[←] [→] arrow keys, then to press [ENTER].
Following the selection of the alarm to be masked, the User is then presented with a sub-
menu, where the choice between 'ACTIVE' and 'MASKED' is made.
IMPORTANT
MN/CRS100.IOM
AGC Eb/No
BUF-SLIP TX-AIS
Comtech EF Data recommends that for most applications the
CRS-100 should be configured to switch on Unit faults only.
The system, now configured, is ready to be put into service.
6–3
Revision 2
MN/CRS100.IOM