Selecting A Stitch; Selecting A Font - Husqvarna Viking Designer topaz 25 User Manual

buttonhole, bartack or darning stitch is selected or when a
satin stitch is selected and ALT is pressed. Reduce or increase

SELECTING A STITCH

Press the
arrow buttons to select among the menus:
1. Utility stitches
2.
3. Heirloom stitches
4. Decorative stitches
5. U -
The name and number of the selected menu is shown at the
bottom of the display. The stitches are pictured inside the lid of
your machine with the menu numbers on the left and the stitch
numbers within the menus across the center.
When you have selected the menu, press the number of the stitch
you wish to use with the
selection menu without making any selection.
on that button immediately, regardless of the selected stitch
menu.
select a stitch from 10 and up from the selected stitch menu. If
the stitch number does not exist in the menu you will hear a beep
The selected stitch menu, stitch and stitch number will be visible
in the same menu just press the number of the stitch or use the
left and right arrow buttons to step stitch by stitch in numerical
change stitch menu and then select the stitch.

SELECTING A FONT

GraphicDisplay. Use the arrow buttons to select among the fonts:
Block, Cyrillic Alphabet, Hiragana Alphabet.
Press the OK button. This automatically opens the mode for
programming letters, see page 39.
–
18
1 2 3
4 5
19
20
D
E
S M 35
EWING ODE